GOOD QUALITY SELF ADHESIVE VINYL/CAR BODY WRAP

GOOD QUALITY SELF ADHESIVE VINYL/CAR BODY WRAP 1. Bubble free/ removable glue 2. Wide range of model. 3. Strong glue and PVC

CAR WRAP/CAR STICKER/SELF ADHESIVE VINYL/CAR BODY WRAP

Basic informatin: 

1. Use: Printable ad. material (Clear and original material without printing).

            Use as indoor/outdoor advertising material, use as vehicle/car body wrap, use to print logo.

Picture to show it's use:

2. Available size:

    0.914x50m 1.07x50m 1.27x50m 1.37x50m 1.52x50m

3. Minimum order quantity: 50 rolls.

   (Before order, we can send you free sample but you should pay shipping cost yourself or "charges collect".)

4. Paymet method: TT 30% deposit+70% balance before shipment, Western Union

5. Shipping method: Order below 100kg can choose express like DHL, UPS, EMS, FEDEX, TNT as shipping cost is affordable,no need to do customs cleance yourself and door to door is much convinient. Above 100kg can choose by air or sea for shipping charges will much more cheaper than by express. But if by air, you need to do customs clearance yourself. And by sea takes more time. All in all, it all depends. If you don't know what way is proper, let us help you find the best way, but the premise is YOU SHOULD TRUST US or you can use your own forwarder or charges collect with small order or free sample!

6. Others:

 To choose material is important, so before order, please make sure which kind of material you want, transparent or non-transparent, removable glue or permanent, UV resistant, waterproof, bubble free, the ink you use, the printer you use and the material you use to do what all are important for choosing a right material that you are looking for, so the more information you provide, the proper material we'll recommend!

7. Application Preparation : 

 1).Check the outdoor temperature. applications perform best at temperatures between 50 and 90 degrees Fahrenheit. If it's too hot, move your car indoors or in the shade. If it's below 50 degrees, use a hair dryer or heat gun to warm the surface and application.

2). Wash the area you are installing the stripes on with car wash soap and warm water. Use a squeegee wrapped in a cloth to thoroughly clean cracks and crevices where your might be applied. Rinse, then dry with a clean, lint-free cloth.

3). Clean the area with wax, grease and tar solvent, and once more with rubbing alcohol and a clean cloth. Wipe in one direction instead of back and forth to prevent contamination.

4). Tape the stripe while it's still in the liners to the vehicle to determine your layout, then remove.

 Our Products:

GOOD QUALITY SELF ADHESIVE VINYL/CAR BODY WRAP